| About |
|---|
| Synthos EPS®/CZ types 0308S, 0513S, 0814S and 1020S are expandable polystyrene (EPS) formed by spherical polystyrene particles that contains a hydrocarbon blowing agent. The material is surface treated against gluing during processing and the formation of electrostatic charge. Synthos EPS® 1020S/CZ (Koplen 1020S) is mainly used for production of high volume blocks with low-density; cutted boards and profiles from the blocks that can serve as filling material in packaging technology.&& |
| Product Description | |
|---|---|
| Generic | PS (EPS) |
| Material Status | Commercial: Active |
| Availabilitys | Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Apparent density | 0.02 to 0.04 | g/cm³ | Internal Method |
| Moisture content | < 10000 | ppm | Internal Method |
| Particle size | |||
| >95% between | 1.00 to 2.00 | mm | Internal Method |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Blowing Agent | < 7.0 | wt% | Internal Method |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. The typical bulk density indicates values obtained during single-step pre-foaming on continuous pre-foaming devices Lower values of bulk density can be achieved only after multiple pre-expansion. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |