| About |
|---|
| F685 is especially suited for processing from powder blends due to its ability to absorb plasticizers regardless of molecular weight. This is a coarser, higher Bulk Density resin especially designed for better flow and higher production rates in extruders. In addition, this product offers: Excellent Electrical Properties Low Contamination Low Gel Content Excellent Heat Stability High Finished Product Physical Properties Lot To Lot Uniformity Suggested Applications: Flexible Extrusion, Wire and Cable, Meat Wrap and Blown Film&& |
| Product Description | |
|---|---|
| Supplier | fpc-tw |
| Generic | PVC homopolymer |
| Material Status | Commercial: Active |
| Features | High purity,Good surface appearance,Good Electrical Properties,Low speed solidification point,Heat Stabilized,Homopolymer |
| Availabilitys | North America,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Apparent density | 0.52 | g/cm³ | ASTM D1895 |
| K-Value | 70.0 | ||
| pollutant | 20 | ||
| Particle size distribution | ASTM D1921 | ||
| 200 Mesh | 3.0 | % | ASTM D1921 |
| 40 Mesh | 100 | % | ASTM D1921 |
| Intrinsic viscosity | 1.0 | ASTM D1243 | |
| Relative viscosity | 2.37 | ASTM D1243 | |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Gel Count | 16.0 | Internal Method | |
| Residual Vinyl Chloride Monomer | < 1 | ppm | Internal Method |
| volatility | 0.20 | % | ASTM D3030 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. OCS per 100g |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |