Braskem PE SHA7260

About
Braskem PE SHA7260 SHA7260 is a high-density polyethylene, developed for the injection molding, easy to process and with high productivity. This resin has a good melt flow with high rigidity and hardness. Its narrow molar mass distribution results in a low tendency to warpage. The minimum biobased content of this grade is 94%, determined according to ASTM D6866. Application: Pails & basins, Caps & Closures, Toys, Lids, Thin-walled parts and Housewares. Rigid containers for cosmetics and pharmaceutical applications (complies with USP 37). Process: Injection Molding&&Braskem PE SHA7260 SHA7260 is a high-density polyethylene, developed for the injection molding, easy to process and with high productivity. This resin has a good melt flow with high rigidity and hardness. Its narrow molar mass distribution results in a low tendency to warpage. The minimum biobased content of this grade is 94%, determined according to ASTM D6866. Application: Pails & basins, Caps & Closures, Toys, Lids, Thin-walled parts and Housewares. Rigid containers for cosmetics and pharmaceutical applications (complies with USP 37). Process: Injection Molding&&

About

Braskem PE SHA7260 SHA7260 is a high-density polyethylene, developed for the injection molding, easy to process and with high productivity. This resin has a good melt flow with high rigidity and hardness. Its narrow molar mass distribution results in a low tendency to warpage. The minimum biobased content of this grade is 94%, determined according to ASTM D6866. Application: Pails & basins, Caps & Closures, Toys, Lids, Thin-walled parts and Housewares. Rigid containers for cosmetics and pharmaceutical applications (complies with USP 37). Process: Injection Molding&&Braskem PE SHA7260 SHA7260 is a high-density polyethylene, developed for the injection molding, easy to process and with high productivity. This resin has a good melt flow with high rigidity and hardness. Its narrow molar mass distribution results in a low tendency to warpage. The minimum biobased content of this grade is 94%, determined according to ASTM D6866. Application: Pails & basins, Caps & Closures, Toys, Lids, Thin-walled parts and Housewares. Rigid containers for cosmetics and pharmaceutical applications (complies with USP 37). Process: Injection Molding&&

Product Description
Supplier	Braskem
Generic	HDPE
Material Status	Commercial: Active
Features	Good Rigidity,Low warping,Excellent Processability,Renewable resources,Good liquidity,Good Hardness,Food contact compliance,No BPA,Weight distribution
Availabilitys	North America,Latin America,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.955	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	20	g/10min	ASTM D1238
ESCR(Environmental Stress Cracking Resistance)
50 ℃, 2.00 mm, 100% non-ionic surfactant, molded, F50	< 4.00	hr	ASTM D1693
Biobased Content	94	%	ASTM D6866

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D, molded	64		ASTM D2240
tensile strength
Yield, molding	29.0	MPa	ASTM D638
Tensile strain
Yield, molding	7.2	%	ASTM D638
Bending modulus
1% cut, molded	1350	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
Compression Molding	25	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed, molded	74.0	℃	ASTM D648
Vicat Softening Temp	124	℃	ASTM D1525 2

Notes
1. Typical properties: these are not to be construed as specifications.
2. Loading 1 (10 N)
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.