EVICOM™ RI5/145

About
Description : Lead stabilised moulding grade Application : Injection moulding Characteristics : Very easy-flow, Low impact. Suitable for outdoor use in White colour only VCM Content, EEC- 81/432CEE: <1 ppm&&

Product Description
Supplier	INEOS
Generic	PVC, not specified
Material Status	Commercial: Active
Features	High impact resistance,Good liquidity,Good stability
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.40	g/cm³	BS 2782 620A

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	> 65.0	℃	BS 2782 121A
Vicat Softening Temp	73.0	℃	BS 2782 120B
Linear coefficient of thermal expansion
MD	6.0E-5	1/℃	ASTM D696
Thermal conductivity coefficient
23℃	0.16	W/m/K	ASTM C177

Electrical performance	Nominal value	Unit	Test method
Surface resistivity	1.0E+13	ohms	BS 2782
Volume resistivity	5.0E+14	ohms·cm	BS 2782

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	115		ASTM D785
Tensile modulus
1% secant, 23 ℃	2800	MPa	ASTM D638
tensile strength
yield	43.0	MPa	BS 2782

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.