ALCUDIA® EBA PA-20020

About
EBA ALCUDIA® PA-20020 offers excellent flexibility and is suitable for injection moulding. The butyl acrylate content is 20%. It contains antioxidant and free flowing agent. TYPICAL APPLICATIONS Injection moulding Blends: microcrystalline and paraffin waxes Modification of asphalts Recommended melt temperature 180°C. EBA copolymers exhibit excellent thermal stability, which allows higher processing temperatures if needed. Processing characteristics of PA-20020 are similar to LDPE and conventional polyethylene extruders are recommended. Processing conditions should be optimised for each production line.&&

About

EBA ALCUDIA® PA-20020 offers excellent flexibility and is suitable for injection moulding. The butyl acrylate content is 20%. It contains antioxidant and free flowing agent. TYPICAL APPLICATIONS Injection moulding Blends: microcrystalline and paraffin waxes Modification of asphalts Recommended melt temperature 180°C. EBA copolymers exhibit excellent thermal stability, which allows higher processing temperatures if needed. Processing characteristics of PA-20020 are similar to LDPE and conventional polyethylene extruders are recommended. Processing conditions should be optimised for each production line.&&

Product Description
Supplier	REPSOL
Generic	EBA
Material Status	Commercial: Active
Features	Good flexibility,Food contact compliance,Inoxidizability
Availabilitys	North America,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.925	g/cm³	ISO 1183
Melt Flow Rate
190℃，2.16kg	20	g/10min	ISO 1133
Butyl acrylate composition	20.0	wt%

MECHANICAL	Nominal value	Unit	Test method
Shore hardness			ISO 868
Shaw’s A	87		ISO 868
Shaw’s D	30		ISO 868
tensile strength
fracture	8.00	MPa	ISO 527-2
Tensile strain
fracture	720	%	ISO 527-2

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	52.0	℃	ISO 306/A
Melting temperature	89.0	℃

Process Conditions
injection	Nominal value	Unit	Test method
Processing (melt) temperature	180	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.