Globalene® ST242

About
Globalene® ST242 is a Polypropylene Alloy (PP Alloy) material. It is available in Asia Pacific or North America for injection molding. Important attributes of Globalene® ST242 are: RoHS Compliant Good Processability High Stiffness Typical applications include: Appliances Household Applications&&

Product Description
Supplier	Lee Chang Yung
Generic	PP Alloy
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability
Availabilitys	North America,Asia Pacific
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.04	g/cm³	ASTM D792
Shrinkage rate
MD	1.0	%	ASTM D995
Melt Flow Rate
230℃，2.16kg	14	g/10min	ASTM D1238

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	131	℃	ASTM D648

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	36	J/m	ASTM D256

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness	87	R 级	ASTM D785
tensile strength
23℃	25	MPa	ASTM D638
Tensile strain
Fracture, 23 ℃	4	%	ASTM D638
Bending modulus
23℃	1971	MPa	ASTM D790

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	60-90	°C
Drying time	2.0-6.0	Hr
Recommended moisture content	<=0.20	%
Barrel rear temperature	200-260	°C
Barrel middle temperature	210-270	°C
Barrel front temperature	220-280	°C
Nozzle temperature	230-290	°C
Mold temperature	20-90	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.