| About |
|---|
| Iztavil P-1069 is a PVC homopolimer polimerized by the emulsion process its principal property is that it have a very high K value, it has been specially designed for products that have high mechanical properties, because its low emulsifier contents give to the products exellent transparency, high water and solvents resistance, and give good aherence to metallic areas. Products that requires high mechanical properties,Plastisol for sealing caps,Vinyl floor recovering, Medical gloves for examination purpose, Cloth recoverings and synthetic leather, Metallic recovering (organosol).&& |
| Product Description | |
|---|---|
| Generic | PVC homopolymer |
| Material Status | Commercial: Active |
| Features | Good Clarity,Low or no water absorption,Good bond,Solvent resistance,Homopolymer |
| Availabilitys | North America,Latin America,Europe |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| Anti scratch | > 4.80 | ||
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | > 6 | Internal Method |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Residual monomer | |||
| VCM | < 3 | ppm | ASTM D3749 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| K (wear) coefficient | 80.0 | ||
| Volatiles | < 0.50 | % | ASTM D3030 |
| viscosity | 1.40 | ASTM D1824 | |
| Sever Viscosity | 10.4 | Pa·s | ASTM D1823 |
| Brookfield viscosity | 3.75 | Pa·s | ASTM D1824 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. IC-LAB-8248 |
| 3. IC-LAB-8246 |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |
