| About |
|---|
| VESTOLIT G Impel S100 is a homopolymer specialty suspension resin intended for use in highly plasticized extrusion and injection molding formulations. It gives superior plasticizer absorption properties allowing the production of low durometer compounds. Quick plasticizer uptake provides a reduction of mix time allowing the higher production rate, reducing compounding times and manufacturing costs.&& |
| Product Description | |
|---|---|
| Generic | PVC homopolymer |
| Material Status | Commercial: Active |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.40 | g/cm³ | ASTM D792 |
| K-Value | 70.0 | Internal Method | |
| pollutant | Internal Method | ||
| Dark Particles | 18 | Internal Method | |
| Light Colored Particles | 22 | Internal Method | |
| Magnetic Particles | 0 | Internal Method | |
| Apparent density of loose states | 0.410 | g/cm³ | Internal Method |
| Intrinsic viscosity | 1.0 | ASTM D1243-60-A | |
| Particle size | Internal Method | ||
| <105 micron | 14.0 | % | Internal Method |
| > 250 micron | 4.00 | % | Internal Method |
| Average particle size | 150 | µm | Internal Method |
| Relative viscosity | 2.37 | Internal Method | |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Powder mixing time | 4.4 | min | Internal Method |
| Residual Vinyl Chloride Monomer | < 1 | ppm | Internal Method |
| volatility | 0.070 | % | Internal Method |
| polymerization process | 悬挂 | ||
| porosity | 0.530 | cm³/g | Internal Method |
| Flow time | |||
| Conditioned Funnel Flow Time | 34.0 | sec | Internal Method |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Correlation, 0.5g/100ml |
| 3. VESTOLIT STP 1169 |
| 4. VESTOLIT STP 1217 Unit: #/100in2 |
| 5. VESTOLIT DFT 1466 |
| 6. Correlation, Cyclohexanone 1% |
| 7. VESTOLIT STP 1094 |
| 8. VESTOLIT STP 488 (with provided formulation) |
| 9. VESTOLIT STP 1005 |
| 10. VESTOLIT STP 793 |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |