Exxtral™ Performance Polyolefin CNU011

About
A specialty thermoplastic polyolefin resin designed for injection molded automotive interior applications in which good surface finish and UV resistance is required.&&

Product Description
Supplier	ExxonMobil
Generic	Polyolefin Elastomer
Material Status	Commercial: Active
Features	Good surface appearance,High impact resistance,Rigid-tough balance
Availabilitys	Africa & Middle East ,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ISO 1183
Melt Flow Rate
230℃，2.16kg	16	g/10min	ISO 1133
Melt Volume Rate
230℃，2.16 kg	21.0	cm³/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus
Secant	1200	MPa	ISO 527-2
tensile strength
yield	24.0	MPa	ISO 527-2/50
Tensile strain
yield	5.2	%	ISO 527-2/50

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength			ISO 179
0 ℃, completely fractured	5.6	kJ/m²	ISO 179
23 ℃, completely fractured	9.0	kJ/m²	ISO 179

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	50.0	℃	ISO 75-2/A
0.45 MPa, unannealed	78.0	℃	ISO 75-2/B

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.