Moplen EP548P - SOLIAO

About
Moplen EP548P Moplen EP548P is a nucleated heterophasic copolymer, suitable for injection moulding applications, and contains an anti-static agent. It exhibits a high stiffness combined with a medium fluidity. Moplen EP548P is extensively used in houseware, furniture, cylindrical containers and crates.&&Moplen EP548P Moplen EP548P is a nucleated heterophasic copolymer, suitable for injection moulding applications, and contains an anti-static agent. It exhibits a high stiffness combined with a medium fluidity. Moplen EP548P is extensively used in houseware, furniture, cylindrical containers and crates. EP548P resin meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact.&&

About

Moplen EP548P Moplen EP548P is a nucleated heterophasic copolymer, suitable for injection moulding applications, and contains an anti-static agent. It exhibits a high stiffness combined with a medium fluidity. Moplen EP548P is extensively used in houseware, furniture, cylindrical containers and crates.&&Moplen EP548P Moplen EP548P is a nucleated heterophasic copolymer, suitable for injection moulding applications, and contains an anti-static agent. It exhibits a high stiffness combined with a medium fluidity. Moplen EP548P is extensively used in houseware, furniture, cylindrical containers and crates. EP548P resin meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact.&&

Product Description
Supplier	LyondellBasell
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,Nucleation,Food contact compliance,Moderate liquidity,Antistatic property,Impact copolymer
Availabilitys	Africa & Middle East ,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ISO 1183
Melt Flow Rate
230℃，2.16kg	16	g/10min	ISO 1133
Melt Volume Rate
230℃，2.16 kg	22.0	cm³/10min	ISO 1133

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength			ISO 179/1eA
-20℃	3.0	kJ/m²	ISO 179/1eA
0℃	4.0	kJ/m²	ISO 179/1eA
23℃	8.0	kJ/m²	ISO 179/1eA
Charpy Unnotch Impact strength			ISO 179/1eU
-20℃	90	kJ/m²	ISO 179/1eU
0℃	140	kJ/m²	ISO 179/1eU
23℃	无断裂		ISO 179/1eU

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	100	℃	ISO 75-2/B
Toughness/brittle transition temperature	-45.0	℃	ISO 6603-2
Vicat Softening Temp
A50	147	℃	ISO 306/A50
B50	70.0	℃	ISO 306

MECHANICAL	Nominal value	Unit	Test method
Ball hardness
H358/30	69.0	MPa	ISO 2039-1
Tensile modulus	1550	MPa	ISO 527-2
tensile strength
yield	28.0	MPa	ISO 527-2
Tensile strain			ISO 527-2
yield	5.0	%	ISO 527-2
fracture	> 50	%	ISO 527-2

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.