| About |
|---|
| BorSafe HE3498-LS is a bimodal polyethylene compound produced by the advanced Borstar technology. It’s fully stabilized against thermal degradation and the die buid-up during extrusion is minimized. Furthermore, it has a highly covered pigment that gives a bright colored stripe even when extruded as a thin layer on a black pipe. It also contains UV-stabilizer. BorSafe HE3498-LS recommended for the production of identifying stripes of black pipes produced from BorSafe HE3490-LS&& |
| Product Description | |
|---|---|
| Supplier | Borealis AG |
| Generic | HDPE |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Good heat aging resistance,Good color stability |
| Availabilitys | Africa & Middle East ,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.953 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 190℃，5.0kg | 0.30 | g/10min | ISO 1133 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |