Caltex PP M710H

About
Caltex PP M710H is a Polypropylene Impact Copolymer (PP Impact Copolymer) material. It is available in Asia Pacific. Primary attribute of Caltex PP M710H: Impact Resistant. Typical applications include: Bottles Sheet&&

Product Description
Supplier	GS Caltex
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	High impact resistance,Good Tensile Strength
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D792
Melt Flow Rate
230℃，2.16kg	0.33	g/10min	ASTM D1238
Shrinkage rate			ASTM D955
MD	1.5 to 1.8	%	ASTM D955
TD	1.5 to 1.8	%	ASTM D955

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	> 490	J/m	ASTM D256
Drop hammer impact	> 24.5	J	ASTM D3029

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	110	℃	ASTM D648
Vicat Softening Temp	146	℃	ASTM D1525

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	80		ASTM D785
tensile strength
yield	25.5	MPa	ASTM D638
Tensile strain			ASTM D638
yield	10	%	ASTM D638
fracture	> 500	%	ASTM D638
Bending modulus	1030	MPa	ASTM D790A

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.