Cardia Compostable™ B-MT02 (Flex)

About
Cardia Compostable B-MT02 is a fully biodegradable and compostable resin based on a blend of thermoplastic starch (TPS), biodegradable polyesters and natural plasticizers. This grade of resin is compatibilised to offer a high level of mechanical strength, impact resistance and toughness. The resin is based on corn starch which is a renewable material. A fully biodegradable and compostable resin Designed to be used for injection moulding and profile/sheet extrusion Cardia Compostable B-MT02 resin is fully biodegradable during composting in professionally managed composting facilities. Complies with International Standard ISO16929, ISO 14855 Cardia Compostable B-MT02 complies with European Standard EN13432, USA Standard ASTM 6400, Australian Standard AS 4736 and Japanese “GreenPla” Standard Chinese Environmental Labelling. Application Examples Biodegradable injection moulded products such as cutlery, toothbrushes, combs, shavers, golf-tees, plant markers, etc. Extruded tubes and rods Biodegradable stakes and pegs Biodegradable tags Extruded pipes Injection moulded containers, caps and closures Compostable rigid products if wall thickness is kept below 1 mm.&&

About

Cardia Compostable B-MT02 is a fully biodegradable and compostable resin based on a blend of thermoplastic starch (TPS), biodegradable polyesters and natural plasticizers. This grade of resin is compatibilised to offer a high level of mechanical strength, impact resistance and toughness. The resin is based on corn starch which is a renewable material. A fully biodegradable and compostable resin Designed to be used for injection moulding and profile/sheet extrusion Cardia Compostable B-MT02 resin is fully biodegradable during composting in professionally managed composting facilities. Complies with International Standard ISO16929, ISO 14855 Cardia Compostable B-MT02 complies with European Standard EN13432, USA Standard ASTM 6400, Australian Standard AS 4736 and Japanese “GreenPla” Standard Chinese Environmental Labelling. Application Examples Biodegradable injection moulded products such as cutlery, toothbrushes, combs, shavers, golf-tees, plant markers, etc. Extruded tubes and rods Biodegradable stakes and pegs Biodegradable tags Extruded pipes Injection moulded containers, caps and closures Compostable rigid products if wall thickness is kept below 1 mm.&&

Product Description
Generic	生物基共聚聚酯
Material Status	Commercial: Active
Features	Good Rigidity,Good flexibility,High impact resistance,Renewable resources,Biodegradable,Compostable
Availabilitys	Africa & Middle East ,North America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.40	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	8.0	g/10min	ASTM D1238
water content	< 0.60	%	Internal Method

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	1340	MPa	ASTM D638
tensile strength
fracture	21.0	MPa	ASTM D638
Tensile strain
fracture	1.6	%	ASTM D638

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	63	J/m	ASTM D256

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.