ELITE™ 5401P

About
ELITE™ 5401P Enhanced Polyethylene Resin is a copolymer produced via INSITE™ Technology from Dow. It offers a unique combination of low seal initiation, moderate stiffness and low blocking for excellent performance on automated packaging equipment. For food and specialty packaging films Superior impact resistance and tear properties Excellent color stability Complies with: U.S. FDA FCN 424 EU, No 10/2011 Consult the regulations for complete details.&&

About

ELITE™ 5401P Enhanced Polyethylene Resin is a copolymer produced via INSITE™ Technology from Dow. It offers a unique combination of low seal initiation, moderate stiffness and low blocking for excellent performance on automated packaging equipment. For food and specialty packaging films Superior impact resistance and tear properties Excellent color stability Complies with: U.S. FDA FCN 424 EU, No 10/2011 Consult the regulations for complete details.&&

Product Description
Supplier	DOW
Generic	EPE
Material Status	Commercial: Active
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.918	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	1.0	g/10min	ASTM D1238

film	Nominal value	Unit	Test method
film thickness
test	25	µm
Membrane puncture strength	1.69	J	Internal Method
Membrane puncture force	35.6	N	Internal Method
Membrane puncture resistance	9.10	J/cm³	Internal Method
Membrane strength			ASTM D882
MD	70.3	J/cm³	ASTM D882
TD	66.2	J/cm³	ASTM D882
Secant modulus			ASTM D882
1% secant, MD	179	MPa	ASTM D882
2% secant, MD	159	MPa	ASTM D882
1% secant, TD	200	MPa	ASTM D882
2% secant, TD	165	MPa	ASTM D882
tensile strength			ASTM D882
MD, yield	11.7	MPa	ASTM D882
TD, yield	11.0	MPa	ASTM D882
MD, fracture	33.8	MPa	ASTM D882
TD, fracture	27.6	MPa	ASTM D882
Tensile strain			ASTM D882
MD, fracture	400	%	ASTM D882
TD, fracture	450	%	ASTM D882
Drop hammer impact	450	g	ASTM D1709-A
Elmandorf tear strength			ASTM D1922
MD	250	g	ASTM D1922
TD	550	g	ASTM D1922

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	100	℃	ASTM D1525
Melting temperature
DSC	123	℃	Internal Method

optical performance	Nominal value	Unit	Test method
gloss
45°	33		ASTM D2457
Haze	22	%	ASTM D1003

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.