Ultramid® A3EG6

About
Ultramid A3EG6 is a 30% glass fiber reinforced injection molding PA66 grade for machinery components and housings of high stiffness and dimensional stability. Applications Typical applications include such as lamp socket housings, cooling fans, insulating profiles for aluminium window frames, and electrical insulation parts.&&

Product Description
Supplier	BASF
Generic	PA66
Material Status	Commercial: Active
Features	Good Rigidity,Good Dimensional Stability,Grease resistance,HB
Availabilitys	North America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.36	g/cm³	ISO 1183
Melt Volume Rate
275℃，5 kg	40.0	cm³/10min	ISO 1133
Shrinkage rate
MD：3.2 mm	0.30	%
Water absorption rate
Saturation, 23 ℃	5.5	%	ISO 62
Equilibrium, 23 ℃, 50% RH	1.7	%	ISO 62
Viscosity (0.5%, 96% H2SO4)	145	cm³/g	ISO 307, 1157, 1628
Shrinkage rate	0.55	%

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus
desiccation	10000	MPa	ISO 527-2
After adjustment	7200	MPa	ISO 527-2
tensile strength			ISO 527-2
Fracture, drying	190	MPa	ASTM D638
Broken, after adjustment	130	MPa	ISO 527-2
Tensile strain			ISO 527-2
Fracture, dry state	3	%	ISO 527-2
After adjustment	5	%	ISO 527-2
Tensile creep modulus (1000hs, strain ≤ 0.5%, 23 ℃)	5300	MPa	ISO 899-1
Bending modulus
desiccation	8600	MPa	ISO 178
After adjustment	6500	MPa	ISO 178
bending strength
desiccation	280	MPa	ISO 178
After adjustment	210	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength
-30 ℃, dry	13	kJ/m²	ISO 179/1eA
-30 ℃, after adjustment	22	kJ/m²	ISO 179/1eA
23 ℃, dry	11	kJ/m²	ISO 179/1eA
Impact strength of cantilever beam notch
23 ℃, dry	11.5	kJ/m²	ISO 180-A
23℃	15.5	kJ/m²	ISO 180-A
Charpy Unnotch Impact strength
-30 ℃, dry	70	kJ/m²	ISO 179/1eU
23 ℃, dry	85	kJ/m²	ISO 179/1eU
23 ℃, after adjustment	100	kJ/m²	ISO 179/1eU

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa	250	℃	ISO 75-1/2
0.45 MPa	250	℃	ISO 75-1/2
Maximum operating temperature (short cycle)	240	℃
Temperature index
5000 hours, 50% loss of tensile strength	165	℃	IEC 216
20000 hours, 50% loss of tensile strength	135	℃	IEC 216
Melting temperature	260	℃	ISO 3146
Linear coefficient of thermal expansion
TD：23~80℃	（0.6~0.7）E-4	1/℃	ISO 11359-1/-2
MD：23~80℃	（0.2~0.3）E-4	1/℃	ISO 11359-1/-2
Thermal conductivity coefficient	0.35	W/m/K	DIN 52612
Specific heat capacity	1500		J/(kg·K)

Electrical performance	Nominal value	Unit	Test method
Volume resistivity
desiccation	1×10^13	ohms·cm	IEC 60093
After adjustment	1×10^10	ohms·cm	IEC 60093
Surface resistivity
After adjustment	1E+10	ohms	IEC 60093
Relative permittivity
Dry, 1 MHz	0.014		IEC 60250
After adjustment, 1 MHz	0.16		IEC 60250
Compared to the leakage tracing index
Solution A	550		IEC 60112
Dissipation factor
desiccation	3.5		IEC 60250
After adjustment	3.6		IEC 60250

FLAME CHARACTERISTICS	Nominal value	Test method
Flame retardant level
1.60 mm	HB	UL 94
Automotive materials (thickness ≥ 1mm)	+	FMVSS 302

Process Conditions
injection molding	Nominal value	Unit	Test method
drying temperature	80	°C
Drying time	2~4	hrs
Recommended maximum moisture content	0.15	%
Melt Temperature	280~305	°C
Mold temperature	80~90	°C
Injection pressure	3.5~12.5	MPa
Injection speed	Fast

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.