PEEK-CLASSIX™ BC1 BLACK

About
PEEK-CLASSIX™ polymer from Invibio® is a high performance, biocompatible thermoplastic designed for medical device applications requiring blood or tissue contact of less than 30 days. A polyaryletherketone, PEEK-CLASSIX polymer is one of the most chemically resistant polymers available and exhibits a superior combination of strength, stiffness and toughness making it ideally suited for medical device applications. The polymer can be processed through conventional techniques including injection molding, extrusion, machining and compression molding allowing medical device manufacturers broad design and manufacturing flexibility. PEEK-CLASSIX polymer is designed for use in medical devices that require short term contact with blood or tissue of less than 30 days. It is not for use in devices designed for long term implantation or requiring contact with blood or tissue of greater than 30 days.&&

About

PEEK-CLASSIX™ polymer from Invibio® is a high performance, biocompatible thermoplastic designed for medical device applications requiring blood or tissue contact of less than 30 days. A polyaryletherketone, PEEK-CLASSIX polymer is one of the most chemically resistant polymers available and exhibits a superior combination of strength, stiffness and toughness making it ideally suited for medical device applications. The polymer can be processed through conventional techniques including injection molding, extrusion, machining and compression molding allowing medical device manufacturers broad design and manufacturing flexibility. PEEK-CLASSIX polymer is designed for use in medical devices that require short term contact with blood or tissue of less than 30 days. It is not for use in devices designed for long term implantation or requiring contact with blood or tissue of greater than 30 days.&&

Product Description
Generic	PAEK
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,High impact resistance,Good Dimensional Stability,Good disinfection,Steam sterilized,Hydrolysis stability,Biocompatible,High pressure disinfection,Radiation disinfection,Good wear resistance,Solvent resistance,Ethylene oxide disinfection
Availabilitys	North America,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.30	g/cm³	ASTM D792

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	95.0	MPa	ISO 527-2
Tensile strain
fracture	> 25	%	ISO 527-2
Bending modulus	4000	MPa	ISO 178
bending strength	154	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	7.2	kJ/m²	ISO 180

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.