| About |
|---|
| 30% glass coupled PP- homopolymer. Low flow, high stiffness, low CLTE and outstanding LTHA values. Low creep under load at elevated temperatures. The product is designed for injection molding of washing machine parts and is available in natural color. Good hot water and detergent resistance. UL listing in all colors including RTI and compliance with UL 2157. It is not intended for medical, pharmaceutical and drinking water applications.&& |
| Product Description | |
|---|---|
| Supplier | LyondellBasell |
| Generic | PP homopolymerization |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Good heat aging resistance,Low liquidity,Chemical coupling,Homopolymer,Resistance to detergents,HB |
| Availabilitys | North America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.14 | g/cm³ | ASTM D792 |
| Density | 1.14 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 2.0 | g/10min | ASTM D1238 |
| 230℃，2.16kg | 2.0 | g/10min | ISO 1133 |
| Melt Volume Rate | |||
| 230℃，5 kg | 8.00 | cm³/10min | ISO 1133 |
| Shrinkage rate | 0.30 to 1.0 | % | Internal Method |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -20℃ | 6.0 | kJ/m² | ISO 179/1eA |
| 23℃ | 9.5 | kJ/m² | ISO 179/1eA |
| Charpy Unnotch Impact strength | ISO 179/1eU | ||
| -20℃ | 35 | kJ/m² | ISO 179/1eU |
| 23℃ | 40 | kJ/m² | ISO 179/1eU |
| Impact strength of cantilever beam notch | ASTM D256 | ||
| 0℃ | 85 | J/m | ASTM D256 |
| 23℃ | 100 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 130 | ℃ | ISO 75-2/A |
| 1.8 MPa, unannealed | 148 | ℃ | ASTM D648 |
| 0.45 MPa, unannealed | 155 | ℃ | ISO 75-2/B |
| Vicat Softening Temp | |||
| A50 | 160 | ℃ | ISO 306/A50 |
| B50 | 130 | ℃ | ISO 306 |
| Relative temperature index | |||
| Electrical performance | 105 | ℃ | UL 746 |
| Strength mechanical performance | 105 | ℃ | UL 746 |
| Impact mechanical performance | 105 | ℃ | UL 746 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | UL 94 | ||
| 1.00 mm, all colors | HB | UL 94 | |
| 1.50 mm, all colors | HB | UL 94 | |
| 3.00 mm, all colors | HB | UL 94 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | |||
| Secant | 6400 | MPa | ISO 527-2 |
| tensile strength | |||
| fracture | 80.0 | MPa | ISO 527-2/50 |
| Yield, 23 ℃ | 85.0 | MPa | ISO 527-2/50 |
| yield | 90.0 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 3.0 | % | ASTM D638 |
| fracture | 3.5 | % | ISO 527-2/50 |
| Bending modulus | 6000 | MPa | ASTM D790 |
| Secant | 5400 | MPa | ISO 178 |
| bending strength | 110 | MPa | ISO 178 |
| Ball hardness | |||
| H358/30 | 115 | MPa | ISO 2039-1 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |