| About |
|---|
| SABIC® HDPE A4046 is a medium density HDPE and is typically used for the production of PE-Xb compounds. The additive package has been optimized for the silane grafting process. The typical application of these is the manufacture of PEX pipes for hot and cold water and central heating. This product is not intended for and must not be used in any pharmaceutical/medical applications.&& |
| Product Description | |
|---|---|
| Supplier | SABIC |
| Generic | HDPE |
| Material Status | Commercial: Active |
| Availabilitys | Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.946 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 3.5 | g/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | |||
| 2 mm, molded into shape | 800 | MPa | ISO 527-2/1BA/50 |
| tensile strength | ISO 527-2/1BA/50 | ||
| Yield, 2 mm, molded | 22.0 | MPa | ISO 527-2/1BA/50 |
| Fracture, 2 mm, molded | 31.0 | MPa | ISO 527-2/1BA/50 |
| Tensile strain | |||
| Fracture, 2 mm, molded | > 200 | % | ISO 527-2/1BA/50 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 73.0 | ℃ | ISO 75-2/B |
| Vicat Softening Temp | 121 | ℃ | ISO 306/A |
| Melting temperature | |||
| DSC | 130 | ℃ | DIN 53765 |
| Enthalpy Change | 186 | J/g | DIN 53765 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |