SCHULADUR® PCR GF30

About
30% glass fibre reinforced PBT/PET blend&&

Product Description
Supplier	A. Schulman
Generic	热塑性聚酯
Material Status	Commercial: Active
Availabilitys	Africa & Middle East ,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.55	g/cm³	ISO 1183

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	10800	MPa	ISO 527-1-2
tensile strength
yield	131	MPa	ISO 527-2/50

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength	9.0	kJ/m²	ISO 179

Supplementary information	Nominal value	Unit	Test method
Filler	31	%	ASTM D5630

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.