| About |
|---|
| Product Description | |
|---|---|
| Supplier | DOMO |
| Generic | PA610 |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,High Viscosity,Low warping,Renewable resources,Plasticizing,Good flexibility,Ultra high toughness,low-temperature impact resistance |
| Availabilitys | Latin America,North America,Africa & Middle East ,Europe,Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data |
|---|
| Process Conditions | |||
|---|---|---|---|
| Injection | Nominal value | Unit | Test method |
| drying temperature | 80 | °C | |
| Recommended maximum moisture content | 0.20 | % | |
| Temperature at the rear of the barrel | 260 to 270 | °C | |
| Temperature in the middle of the barrel | 265 to 275 | °C | |
| Front temperature of material barrel | 270 to 280 | °C | |
| Mold temperature | 60 to 80 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |