EMERGE™ PC/PET 9100CR MED

About
EMERGE™ PC/PET 9100CR advanced resin is a polycarbonate blend with excellent chemical resistance. This grade was designed for use in medical equipment housings and can withstand repeated exposure to a variety of cleaners and disinfectants commonly used in hospitals. This grade has good aesthetics and excellent toughness. Main Characteristics: Excellent chemical resistance Tested under ISO 10993 UL listing for HB Applications: Medical device housings or enclosures&&

About

EMERGE™ PC/PET 9100CR advanced resin is a polycarbonate blend with excellent chemical resistance. This grade was designed for use in medical equipment housings and can withstand repeated exposure to a variety of cleaners and disinfectants commonly used in hospitals. This grade has good aesthetics and excellent toughness. Main Characteristics: Excellent chemical resistance Tested under ISO 10993 UL listing for HB Applications: Medical device housings or enclosures&&

Product Description
Supplier	Trinseo
Generic	PC+PET
Material Status	Commercial: Active
Features	Good flexibility,Good surface appearance,Biocompatible,Solvent resistance
Availabilitys	North America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.23	g/cm³	ASTM D792
Melt Flow Rate
260℃，5.0kg	8.5	g/10min	ASTM D1238
Shrinkage rate
MD	0.60 to 0.90	%
TD	0.50 to 0.80	%

IMPACT	Nominal value	Unit
Impact strength of cantilever beam notch
-30 ℃, 3.2mm, injection molding	750	J/m
23 ℃, 3.2mm, injection molding	910	J/m
Dart impact equipped with measuring instruments
-40 ℃, 3.20 mm, injection molded, Peak Energy	55.4	J
-40 ℃, 3.20 mm, injection molded, Total Energy	80.2	J
23 ℃, 3.20 mm, injection molded, Peak Energy	46.3	J
23 ℃, 3.20 mm, injection molding, total energy	63.3	J

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	117	℃
1.8 MPa, unannealed	87.2	℃
Vicat Softening Temp	144	℃	ASTM D1525 7

Electrical performance	Nominal value	Unit	Test method
Surface resistivity	4.3E+15	ohms	IEC 60093
Volume resistivity	3.4E+15	ohms·cm	IEC 60093
Dielectric strength
1.6 mm in oil	28	kV/mm
3.2 mm in oil	17	kV/mm
Relative permittivity
100 Hz	3.28
1 MHz	3.12
Dissipation factor
100 Hz	2.0E-3
1 MHz	0.020

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
1.00 mm	HB		UL 94

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-grade, 3.20 mm	111		ASTM D785
Tensile modulus
3.20 mm, injection molded	2210	MPa	ASTM D638
tensile strength
Yield, 3.20 mm, injection molding	50.0	MPa
Fracture, 3.20 mm, injection molded	56.2	MPa
Tensile strain
Yield, 3.20 mm, injection molding	4.7	%
Fracture, 3.20 mm, injection molded	150	%
Bending modulus
3.20 mm, injection molded	2100	MPa	ASTM D790
bending strength
3.20 mm, injection molded	77.2	MPa	ASTM D790

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	121	°C
Drying time	3.0 to 4.0	hr
Processing (melt) temperature	249 to 282	°C
Mold temperature	43 to 99	°C

Notes
1. Biocompatibility testing following ISO Guidelines 10993 has been completed on select classic resins in this series. Please consult Styron for details. ISO guidelines include a sensitization test.
2. Typical properties: these are not to be construed as specifications.
3. 0.20 in/min
4. 2.0 in/min
5. 0.051 in/min
6. Rate B (120°C/h), Loading 1 (10 N)
7. This rating not intended to reflect hazards presented by this or any other material under actual fire conditions.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.