TOTAL Polypropylene PPH 3825WZ

About
Polypropylene 3825WZ is engineered with nucleation to provide fast cycle time and improve contact clarity in thin wall multi-cavity molds. Antistat. 3825WZ contains an antistat that will help protect molded parts from dust accumulation. FDA: 3825WZ complies with all applicable FDA regulations for food contact applications. Applications: 3825WZ is recommended for large thin wall parts, caps, and closures. Processing: 3825WZ resin processes on conventional injection molding equipment with typical melt temperatures of 390-450°F (200-232°C).&&

About

Polypropylene 3825WZ is engineered with nucleation to provide fast cycle time and improve contact clarity in thin wall multi-cavity molds. Antistat. 3825WZ contains an antistat that will help protect molded parts from dust accumulation. FDA: 3825WZ complies with all applicable FDA regulations for food contact applications. Applications: 3825WZ is recommended for large thin wall parts, caps, and closures. Processing: 3825WZ resin processes on conventional injection molding equipment with typical melt temperatures of 390-450°F (200-232°C).&&

Product Description
Supplier	TOTAL
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good Clarity,Good liquidity,Nucleation,Quick molding cycle,Food contact compliance,Antistatic property,Homopolymer
Availabilitys	North America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.905	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	30	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	32	J/m	ASTM D256-A
Notched impact strength of cantilever beam
23℃	850	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	127	℃	ASTM D648
Melting temperature	166	℃	DSC

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	107		ASTM D785
Tensile modulus	1720	MPa	ASTM D638
tensile strength	38.6	MPa	ASTM D638
Tensile strain
fracture	11	%	ASTM D638
Bending modulus	1790	MPa	ASTM D790

Process Conditions
injection	Nominal value	Unit	Test method
Processing (melt) temperature	199 to 232	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.