| About |
|---|
| HIVOREX FL7200是双峰高密度聚乙烯共聚物，具有宽分子量分布，具有独特的易挤出和高熔体强度特性，优异的物理性能，适用于具有优异强度和刚性的超薄膜。 |
| Product Description | |
|---|---|
| Supplier | LOTTE |
| Generic | HDPE |
| Material Status | Commercial: Active |
| Features | Inoxidizability,Good melt strength |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.957 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 0.07 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 30.4 | MPa | ASTM D638 |
| MD, fracture | 63.7 | MPa | ASTM D882 |
| TD, fracture | 58.5 | MPa | ASTM D882 |
| Tensile strain | > 500 | % | ASTM D638 |
| MD, fracture | 300 | % | ASTM D882 |
| TD | 500 | % | ASTM D882 |
| tear strength | |||
| MD | 130 | kg/cm | ASTM D1004 |
| TD | 230 | kg/cm | ASTM D1004 |
| Bending modulus | 981 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Notched impact strength of cantilever beam | |||
| 23℃ | >294 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 124 | ℃ | ASTM D1525 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |