| About |
|---|
| KetaSpire® KT-880 GF30 is the high-flow, 30% glass-fiber reinforced grade of polyetheretherketone (PEEK). This resin offers higher strength and stiffness properties relative to unreinforced KetaSpire® PEEK resin. Reinforcement also affords greater mechanical robustness in structural applications, particularly those with service temperatures approaching 300°C. KetaSpire® PEEK is produced to the highest industry standards and is characterized by a distinct combination of properties, which include excellent wear resistance, best-in-class fatigue resistance, ease of melt processing, high purity and excellent chemical resistance to organics, acids and bases. These properties make it well-suited for applications in healthcare, transportation, electronics, chemical processing and other industrial uses. Beige: KT-880 GF30 BG 20 Black: KT-880 GF30 BK 95&& |
| Product Description | |
|---|---|
| Supplier | Solvay |
| Material Status | Commercial: Active |
| Features | Biocompatible,High pressure disinfection,Good Dimensional Stability,Resistance to the steam,Ethylene oxide disinfection,Radiation disinfection,High liquidity,Steam sterilized,Good disinfection,Fatigue resistance,Solvent resistance,High Heat Resistance,Gamma radiation,E-beam disinfection,Radioactive,Good Rigidity,Flame Characteristics,Heat sterilization |
| Availabilitys | Africa & Middle East ,North America,Asia Pacific,Latin America,Europe |
| Process Methods | Injection Molding,Profile extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.53 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 400°C、2.16 kg | 14 | g/10min | ASTM D1238 |
| Forming shrinkage rate | |||
| Flow:3.18 mm | 0.1-0.3 | % | ASTM D955 |
| Across flow:3.18 mm | 1.3-1.5 | % | ASTM D955 |
| Water absorption rate | 0.1 | % | ASTM D570 |
| Apparent viscosity of melt | 250 | Pa·s | ASTM D3835 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | |||
| 10800 | MPa | ASTM D638 | |
| 11200 | MPa | ISO 527-2 | |
| tensile strength | |||
| 174 | MPa | ISO 527-2 | |
| 162 | MPa | ASTM D638 | |
| elongation at break | |||
| 3.1 | % | ASTM D638 | |
| 3.1 | % | ISO 527-2 | |
| Bending modulus | |||
| 10500 | MPa | ASTM D790 | |
| 10600 | MPa | ISO 178 | |
| bending strength | |||
| 260 | MPa | ASTM D790 | |
| 239 | MPa | ISO 178 | |
| tensile strength | 183 | MPa | ASTM D695 |
| Shear strength | 94.4 | MPa | ASTM D732 |
| Rockwell hardness | 105 | ASTM D-785 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 96 | J/m | ASTM D256 | |
| 11 | KJ/m² | ISO 180/1A | |
| Notched impact strength of cantilever beam | |||
| 850 | J/m | ASTM D256 | |
| 62 | KJ/m² | ISO 180/1U |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa | 315 | ℃ | ASTM D648 |
| Glass transition temperature | 147 | ℃ | ASTM D3418 |
| Melting temperature | 343 | ℃ | ASTM D3418 |
| Linear coefficient of thermal expansion | |||
| -50-50℃ | 1.9E-5 | cm/cm/℃ | ASTM E831 |
| specific heat | |||
| 50℃ | 1280 | J/kg/℃ | DSC |
| 200℃ | 1700 | J/kg/℃ | DSC |
| Thermal conductivity coefficient | 0.3 | W/m/K | ASTM E1530 |
| ELECTRICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | >1.9E17 | ohms | ASTM D257 |
| Volume resistivity | 3.8E17 | ohms·cm | IEC 60093 |
| Dielectric strength | |||
| 3 mm | 16 | kV/mm | ASTM D149 |
| Dielectric constant | |||
| 60 Hz | 3.53 | ASTM D150 | |
| 1 KHz | 3.53 | ASTM D150 | |
| 1 MHz | 3.49 | ASTM D150 | |
| Dissipation factor | |||
| 60 Hz | 2E-3 | ASTM D150 | |
| 1 KHz | 2E-3 | ASTM D150 | |
| 1 MHz | 4E-3 | ASTM D150 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 0.8 mm | V-0 | UL 94 | |
| 1.6 mm | V-0 | UL 94 |
| Process Conditions | |||
|---|---|---|---|
| Injection | Nominal value | Unit | Test method |
| Injection speed | Nominal value | Unit | Test method |
| drying temperature | 150 | °C | |
| Drying time | 4.0 | hr | |
| Temperature at the rear of the barrel | 365 | °C | |
| Temperature in the middle of the barrel | 371 | °C | |
| Front temperature of material barrel | 377 | °C | |
| Nozzle temperature | 382 | °C | |
| Mold temperature | 177 to 204 | °C | |
| Screw compression ratio | 2.5:1.0 to 3.5:1.0 | ||
| Notes |
|---|
| 1. Passes 60s VB flame, smoke and toxicity requirements. |
| 2. Only KetaSpire® KT-880 GF30 BG20 is ISO 10993 certified |
| 3. Typical properties: these are not to be construed as specifications. |
| 4. 5″ x 0.5″ x 0.125″ |
| 5. 0.20 in/min |
| 6. Crystallized |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |