| About |
|---|
| LDF2023S1 is a low density polyethylene which contains slip and antiblock additives. It has good optical properties and excellent processability. Applications: Bags and sacks, Shrink Film, Blown Film, Cast Film and Food Packaging Films. Process: Blown Film, Cast Film.&& |
| Product Description | |
|---|---|
| Supplier | Braskem |
| Generic | LDPE |
| Material Status | Commercial: Negative |
| Features | Excellent Processability,Smoothness,Optical performance,High anti-blocking |
| Availabilitys | North America,Latin America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.923 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 2.0 | g/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 260 | MPa | ISO 527-2 |
| tensile strength | |||
| fracture | 600 | MPa | ISO 527-3 |
| yield | 11.0 | MPa | ISO 527-2 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| Drop hammer impact | 110 | g | ASTM D1709 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | |||
| A50 | 94.0 | ℃ | ISO 306/A50 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | ASTM D2457 | ||
| 20° | > 50 | ASTM D2457 | |
| 60° | > 100 | ASTM D2457 | |
| Haze | |||
| 50 µm | < 9.0 | % | ASTM D1003 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |