Complet® LGF40-PA12

About
Complet® LGF40-PA12 is a Polyamide 12 (Nylon 12) product filled with 40% long glass fiber. It is available in Asia Pacific, Europe, or North America. Primary characteristic: rohs compliant.&&

Product Description
Generic	PA12
Material Status	Commercial: Active
Availabilitys	North America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.31	g/cm³	ASTM D792

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	9650	MPa	ASTM D638
tensile strength	145	MPa	ASTM D638
Tensile strain
fracture	2.0 to 3.0	%	ASTM D638
Bending modulus	8270	MPa	ASTM D790
bending strength	241	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	370	J/m	ASTM D256
Notched impact strength of cantilever beam	1300	J/m	ASTM D4812

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.