Derakane® Momentum 470-300

About
DERAKANE MOMENTUM 470-300 resin is a novolac-based vinyl ester designed to provide exceptional mechanical properties at higher temperatures. This resin offers a high resistance to solvents and chemicals, good retention of strength and toughness at elevated temperatures, and excellent resistance to acidic oxidizing environments. DERAKANE MOMENTUM resins are a new generation of resins that can be used to improve fabrication efficiency and product quality. Their lighter color makes defects easier to see and correct while the resin is still workable. The longer stability provies additional flexibility to fabricators in storage and handling. APPLICATIONS AND USE DERAKANE MOMENTUM 470-300 resin is suitable for applications involving high temperature chlorination or caustic scrubbing and storage, industrial waste treatment facilities and solvent extraction processes used in mining. It is also used for hydrochloric acid transport, tank, truck and railcar linings, and gasohol storage. DERAKANE MOMENTUM 470-300 is recommended for most commercial FRP fabrication processes including hand lay-up, spray-up, pultrusion and resin transfer molding. The higher viscosity of MOMENTUM DERAKANE 470-300 resin facilitates filament winding and contact molding applications.&&

About

DERAKANE MOMENTUM 470-300 resin is a novolac-based vinyl ester designed to provide exceptional mechanical properties at higher temperatures. This resin offers a high resistance to solvents and chemicals, good retention of strength and toughness at elevated temperatures, and excellent resistance to acidic oxidizing environments. DERAKANE MOMENTUM resins are a new generation of resins that can be used to improve fabrication efficiency and product quality. Their lighter color makes defects easier to see and correct while the resin is still workable. The longer stability provies additional flexibility to fabricators in storage and handling. APPLICATIONS AND USE DERAKANE MOMENTUM 470-300 resin is suitable for applications involving high temperature chlorination or caustic scrubbing and storage, industrial waste treatment facilities and solvent extraction processes used in mining. It is also used for hydrochloric acid transport, tank, truck and railcar linings, and gasohol storage. DERAKANE MOMENTUM 470-300 is recommended for most commercial FRP fabrication processes including hand lay-up, spray-up, pultrusion and resin transfer molding. The higher viscosity of MOMENTUM DERAKANE 470-300 resin facilitates filament winding and contact molding applications.&&

Product Description
Generic	乙烯基酯
Material Status	Commercial: Active
Features	Corrosion Resistant,Acidproof,Solvent resistance
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.17	g/cm³	ISO 1183
Solution viscosity	325	mPa·s
styrene content	33	%

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	149	℃	ASTM D648
1.8 MPa, unannealed	150	℃	ISO 75-2/A
Glass transition temperature
—	166	℃	ASTM D3418
—	165	℃	ISO 11357-2

Supplementary information	Nominal value	Unit	Test method
Volume contraction	8.3	%

MECHANICAL	Nominal value	Unit	Test method
Babbitt hardness	40		ASTM D2583
Tensile modulus
—	3590	MPa	ASTM D638
—	3600	MPa	ISO 527-2
tensile strength
—	86.2	MPa	ASTM D638
—	85.0	MPa	ISO 527-2
Tensile strain
yield	3.0 to 4.0	%	ASTM D638 , ISO 527-2
Bending modulus
—	3790	MPa	ASTM D790
—	3800	MPa	ISO 178
bending strength
—	131	MPa	ASTM D790
—	130	MPa	ISO 178

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.