| About |
|---|
| IXAN® SGA-1 is a self-adhesive coat for use on aluminium, steel and plastic films, metallised or not. This universal grade may also be used as an adhesion primer for laminating or coating on plastic films. This resin is soluble in a wide range of solvents at room temperature.&& |
| Product Description | |
|---|---|
| Supplier | Solvay |
| Generic | PVDC |
| Material Status | Commercial: Active |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | |||
| volume | 500 | kg/m³ | |
| coating | 1.65 | g/cm³ | |
| exterior | 白色粉末 | ||
| viscosity | |||
| 20℃ | 0.06 | Pa·s | |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| Oxygen transfer rate | |||
| 25℃，85% RH，1.0 µm | 250 | cm³/m²/24 hr | |
| Water vapor transmittance | |||
| 38℃，90% RH，1.0 µm | 150 | g/m²/24 hr | |
| Heat sealing threshold | |||
| 0.4 N/cm | 115 | ℃ | |
| Maximum heat sealing resistance | 0.75 | N/cm |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| volatility | < 1.5 | % | |
| Turbidity | |||
| 24 hours, 20 ℃ | 77.0 | µA | |
| Solvent – Yes | 常见溶剂 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 20 PSI – 1s – 1 heated jaw |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |