Silopren® Gel TP3636

About
Silopren Gel TP 3636 is a solvent-free, low-viscosity roomtemperature vulcanizing two-component silicone rubber, which crosslinks into a gel-like product by an addition reaction caused by mixing components A and B. The resulting gel is transparent and dimensionally stable and adheres to virtually all substrates. With its good electrical insulation capacity Silopren Gel TP 3636 can be used, for example, to protect electronic components. The silicone gel protects sensitive components from moisture and through its good mechanical damping properties from shocks and shaking. The silicone gel retains these properties over a wide temperature range. Key Features and Benefits solvent-free, low viscosity, room-temperature vulcanizing transparent and dimensionally stable good electrical insulation retains these properties over a wide temperature range.&&

About

Silopren Gel TP 3636 is a solvent-free, low-viscosity roomtemperature vulcanizing two-component silicone rubber, which crosslinks into a gel-like product by an addition reaction caused by mixing components A and B. The resulting gel is transparent and dimensionally stable and adheres to virtually all substrates. With its good electrical insulation capacity Silopren Gel TP 3636 can be used, for example, to protect electronic components. The silicone gel protects sensitive components from moisture and through its good mechanical damping properties from shocks and shaking. The silicone gel retains these properties over a wide temperature range. Key Features and Benefits solvent-free, low viscosity, room-temperature vulcanizing transparent and dimensionally stable good electrical insulation retains these properties over a wide temperature range.&&

Product Description
Supplier	Momentive
Generic	硅橡胶,RTV-2
Material Status	Commercial: Active
Features	Good flexibility,High elastic,Crystal,High Heat Resistance,Low density,Amorphous
Availabilitys	North America,Asia Pacific,Europe

Technical Data
Electrical performance	Nominal value	Unit	Test method
Volume resistivity	1.0E+15	ohms·cm	DIN 53481
Dielectric strength	24	kV/mm	DIN 53481
Dielectric constant
1 kHz	2.70		DIN 53483
Dissipation factor
1 kHz	1.0E-3		DIN 53483

THERMAL	Nominal value	Unit
Thermosetting components
Component A	按重量计算的混合比: 1.0
Component B	按重量计算的混合比: 1.0
Storage period
< 27℃	26	wk

Uncured Properties	Nominal value	Unit
colour
—	Clear/Transparent
—	Clear/Transparent
Density
—	0.980	g/cm³
—	0.980	g/cm³
viscosity
—	1.0	Pa·s
—	1.0	Pa·s
Gelation time
150℃	10	min
100℃	30	min
60℃	60	min
storage stability
23℃	5.0	min

Notes
1. Typical properties: these are not to be construed as specifications.
2. Part B
3. Part A
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.