| About |
|---|
| PP R125 IM is a propylene-ethylene random copolymer. The product features fluidity above average, an optimal stabilization package and balanced physical and mechanical properties.&& |
| Product Description | |
|---|---|
| Supplier | SIBUR |
| Generic | PP copolymer |
| Material Status | Commercial: Active |
| Features | Low liquidity,Random copolymer,Good stability |
| Availabilitys | Africa & Middle East ,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 230℃，2.16kg | 13 | g/10min | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 23.0 | MPa | Internal Method |
| Tensile strain | |||
| yield | 12 | % | Internal Method |
| Bending modulus | 800 | MPa | Internal Method |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 9.0 | kJ/m² | Internal Method |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 65.0 | ℃ | Internal Method |
| Vicat Softening Temp | 135 | ℃ | Internal Method 4 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |