BCC BC 4553 Resins

About
BC 4553 is designed for instant buildup and repair of plastic surfaces and models. Recommended for use on SMC and FRP parts, vacuum form molds and a variety or surfaces. When cured BC 4553 produces a hard, strong, chip resistant, tack-free surfaces.&&

Product Description
Generic	热固性聚酯
Material Status	Commercial: Active
Features	No viscosity,High impact resistance,High Heat Resistance,Good bond,Solvent resistance
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.72	g/cm³	ASTM D792

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	88		ASTM D2240

THERMAL	Nominal value	Unit
Thermosetting components
resin	按重量计算的混合比: 100
Hardening method	按重量计算的混合比: 1.5
storage stability
24 ℃	5.0 to 10	min
stripping time
24℃	20 to 60	min

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.