| About |
|---|
| ICORENE® 6007 is a linear low density polyethylene foam specifically formulated for rotomoulding. This grade is a high performance and a easy to use polyethylene foam for the rotomoulding industry. It features an excellent foam expansion uniformity. It is a dust free product allowing for improved handling in blow feeders and drop boxes. ICORENE® 6007 can be used in many applications in combination with ICORENE® products for creating stiff, lightweight two or three layer structures.&& |
| Product Description | |
|---|---|
| Generic | 泡沫 |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Foaming performance |
| Availabilitys | Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | Internal Method | ||
| — | 0.120 to 0.180 | g/cm³ | Internal Method |
| — | 0.936 | g/cm³ | Internal Method |
| Melt Flow Rate | 6.0 | g/10min | ASTM D1238 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Expanded |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |