| About |
|---|
| Sumiflex® QE QE129ATH is a Styrenic Thermoplastic Elastomer (TES) material. It is available in Asia Pacific for injection molding. Important attributes of Sumiflex® QE QE129ATH are: Good Aesthetics Good Flexibility Scratch Resistant UV Resistant Wear Resistant Typical applications include: Automotive Handles&& |
| Product Description | |
|---|---|
| Supplier | Mitsubishi |
| Generic | TES |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Good flexibility,Good surface appearance,Good wear resistance,High scratch resistance |
| Availabilitys | Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.928 | g/cm³ | JIS K7112 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| 10 seconds | 80 | JIS K6253 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| fracture | 6.50 | MPa | JIS K6251 |
| 100% strain | 3.20 | MPa | JIS K6251 |
| Tensile strain | |||
| fracture | 570 | % | JIS K6251 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |