| About |
|---|
| CONFOR® CF-45 is a Polyurethane material. It is available in North America. Primary attribute of CONFOR® CF-45: Bacteria Resistant. Typical applications include: Aerospace Automotive Electrical/Electronic Applications Foam Marine Applications&& |
| Product Description | |
|---|---|
| Generic | PUR |
| Material Status | Commercial: Active |
| Features | noise reduction,Antimicrobial properties,Ozone resistance |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.0959 | g/cm³ | ASTM D792 |
| Water absorption rate | |||
| 24hr | 0.80 | % | ASTM D570 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 0.152 | MPa | ASTM D638 |
| Tensile strain | |||
| yield | 110 | % | ASTM D638 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Thermal conductivity coefficient | 0.040 | W/m/K | ASTM C177 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | 1.6E+13 | ohms·cm | ASTM D257 |
| Dielectric strength | 1.1 | kV/mm | ASTM D149 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |