TECHNYL STAR™ AF 218 V25 BLACK 21N

About
TECHNYL STAR® AF 218 V25 Black 21N is a polyamide 6.6, high flow, reinforced with 25% of glass fiber, heat stabilized, for injection moulding. Due to its outstanding flow caracteristics, this grade shows exceptional processing behaviour and excellent surface aspect of the finished part. This grade is ideal for use in the automotive industry for engine components. This grade is ideal for Mucell® injection moulding technology.&&

About

TECHNYL STAR® AF 218 V25 Black 21N is a polyamide 6.6, high flow, reinforced with 25% of glass fiber, heat stabilized, for injection moulding. Due to its outstanding flow caracteristics, this grade shows exceptional processing behaviour and excellent surface aspect of the finished part. This grade is ideal for use in the automotive industry for engine components. This grade is ideal for Mucell® injection moulding technology.&&

Product Description
Supplier	DOMO
Generic	PA66
Material Status	Commercial: Active
Features	Heat Stabilized,Good surface appearance,Excellent Processability,High liquidity
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.32	g/cm³	ISO 1183/A
Water absorption rate
23℃，24hr	0.90	%	ISO 62

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus
23℃	8800	MPa	ISO 527-2/1A
tensile strength
Fracture, 23 ℃	150	MPa	ISO 527-2/1A
Tensile strain
Fracture, 23 ℃	2.7	%	ISO 527-2

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength
23℃	8.0	kJ/m²	ISO 179/1eA
Charpy Unnotch Impact strength
23℃	55	kJ/m²	ISO 179/1eU

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	240	℃	ISO 75-2/Af
Melting temperature	263	℃	ISO 11357-3

Process Conditions
Injection	Nominal value	Unit	Test method
drying temperature	80	°C
Recommended maximum moisture content	0.20	%
Temperature at the rear of the barrel	265 to 275	°C
Temperature in the middle of the barrel	270 to 280	°C
Front temperature of material barrel	280 to 290	°C
Mold temperature	60 to 90	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.