Formolene® 3320B

About
Formolene® 3320B is a high flow random copolymer with fast cycle time and easy mold release. It is designed for injection molding applications. Its clarity makes it an excellent choice for “see-through” housewares and rigid packaging. Formolene® 3320B meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles and components of articles intended for direct food contact. This material is free of animal-derived content.&&

About

Formolene® 3320B is a high flow random copolymer with fast cycle time and easy mold release. It is designed for injection molding applications. Its clarity makes it an excellent choice for “see-through” housewares and rigid packaging. Formolene® 3320B meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles and components of articles intended for direct food contact. This material is free of animal-derived content.&&

Product Description
Supplier	fpc-tw
Generic	PP copolymer
Material Status	Commercial: Active
Features	Good Clarity,High liquidity,Quick molding cycle,ADCF,Good stripping performance
Availabilitys	North America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.90	g/cm³	ASTM D792
Melt Flow Rate
230℃，2.16kg	20	g/10min	ASTM D1238

optical performance	Nominal value	Unit	Test method
Haze 1270 μ M	6.2	%	ASTM D1003

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	87	℃	ASTM D648

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level
1.50 mm	HB		UL-94

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	69	J/m	ASTM D256

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness	100	R 级	ASTM D785
tensile strength
23℃	29	MPa	ASTM D638
Tensile strain
Fracture, 23 ℃	12	%	ASTM D638
Bending modulus
23℃	1030	MPa	ASTM D790

Process Conditions
injection	Nominal value	Unit	Test method
Injection temperature
Mold temperature	30-50	°C

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.