| About |
|---|
| Safrene® C 7260 High Density Polyethylene Resin is an injection moulding grade with high flow characteristics, good mechanical strength, high stiffness combined with low distortion tendency. It is a general purpose injection moulding grade especially suited for crates and industrial containers. Typical Applications Crates for beverages, dairy and meat use Caps and closures Storage and transport containers Buckets and lids&& |
| Product Description | |
|---|---|
| Generic | HDPE |
| Material Status | Commercial: Active |
| Features | Good Rigidity,High liquidity,High elastic,Food contact compliance |
| Availabilitys | Africa & Middle East |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.958 | g/cm³ | ISO 1183 |
| Melt Flow Rate | ISO 1133 | ||
| 190℃，2.16kg | 7.0 | g/10min | ISO 1133 |
| 190℃，5.0kg | 23 | g/10min | ISO 1133 |
| Spiral flow length | 47.0 | cm | Internal Method |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | ||
| -30 ℃, molded | 4.0 | kJ/m² | ISO 179 |
| 23 ℃, molded | 4.0 | kJ/m² | ISO 179 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | |||
| A50 | 127 | ℃ | ISO 306/A50 |
| B50 | 72.0 | ℃ | ISO 306 |
| Crystallization peak temperature | |||
| DSC | 130 to 133 | ℃ | ISO 3146 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D, molded | 65 | ISO 868 | |
| tensile strength | ISO 527-2/50 | ||
| Yield, molding | 32.0 | MPa | ISO 527-2/50 |
| Fracture, molded | 20.0 | MPa | ISO 527-2/50 |
| Tensile strain | ISO 527-2/50 | ||
| Yield, molding | 10 | % | ISO 527-2/50 |
| Fracture, molded | > 800 | % | ISO 527-2/50 |
| Bending modulus | 1450 | MPa | ISO 178 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Processing (melt) temperature | 200 to 260 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Unannealed |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |