| About |
|---|
| mPE M 4040 is a second generation metallocene based Polyethylene with hexene as co-monomer. mPE M 4040 is intended for the manufacture of silane cross-linked pipes. Thanks to Its very specific molecular structure, mPE M 4040 exhibits: High fluidity Low density Cross-linked pipes manufactured with mPE M 4040 point up the following properties: Very high flexibility Superior dimensional stability&& |
| Product Description | |
|---|---|
| Supplier | TOTAL |
| Generic | mMDPE |
| Material Status | Commercial: Negative |
| Features | Good flexibility,Good Dimensional Stability,High liquidity,Crosslinked,Low density,Hexene copolymers |
| Availabilitys | Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.940 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 4.0 | g/10min | ISO 1133 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 125 | ℃ | ISO 306 |
| Melting temperature | 126 | ℃ | ISO 11357-3 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |