Adstif HA5034 - SOLIAO

About
Adstif HA5034 is a high crystallinity polypropylene homopolymer, which features an extremely high stiffness, high gloss and maintaining mechanical properties even at high temperatures. Adstif HA5034 is selected by customers for use in the production of stiff injection mouldedarticles where high rigidity is needed. Typical applications of Adstif HA5034 include food packaging containers, housewares, small appliances and technical parts. It is typically used by customers in small appliances and automotive compounding applications where high rigidity and very good thermal characteristics are required. Adstif HA5034 is used in food contact. Product Features Very high long term heat resistance and High HDT/ High Stiffness/High CrystallizationTemperature/High surface hardness/ Good pigment dispersion Typical Applications Small appliances and technical parts/Rice cooker case/Microwave oven/Electric Kettle/Auto compound/Heater case/Food packaging containers/Housewares&&

About

Adstif HA5034 is a high crystallinity polypropylene homopolymer, which features an extremely high stiffness, high gloss and maintaining mechanical properties even at high temperatures. Adstif HA5034 is selected by customers for use in the production of stiff injection mouldedarticles where high rigidity is needed. Typical applications of Adstif HA5034 include food packaging containers, housewares, small appliances and technical parts. It is typically used by customers in small appliances and automotive compounding applications where high rigidity and very good thermal characteristics are required. Adstif HA5034 is used in food contact. Product Features Very high long term heat resistance and High HDT/ High Stiffness/High CrystallizationTemperature/High surface hardness/ Good pigment dispersion Typical Applications Small appliances and technical parts/Rice cooker case/Microwave oven/Electric Kettle/Auto compound/Heater case/Food packaging containers/Housewares&&

Product Description
Supplier	LyondellBasell
Generic	HC PP
Material Status	Commercial: Active
Features	Good Rigidity,Good surface appearance,High liquidity,Good Hardness,Food contact compliance,High Heat Resistance,High crystallization,Homopolymer
Availabilitys	Asia Pacific
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	14	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	20	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	135	℃	ASTM D648

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	115		ASTM D785
tensile strength
yield	39.2	MPa	ASTM D638
Tensile strain
yield	6.0	%	ASTM D638
Bending modulus	2160	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.