| About |
|---|
| MIRASON™ 68是一种低密度聚乙烯材料,。 该产品在亚太地区有供货,加工方式为:注射成型。 MIRASON™ 68的主要特性为:良好的柔韧性。 典型应用领域包括: 工程/工业配件 帽子/盖子/瓶塞&& |
| Product Description | |
|---|---|
| Supplier | Mitsui |
| Generic | LDPE |
| Material Status | Commercial: Active |
| Features | Good flexibility,Good liquidity |
| Availabilitys | Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.916 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 23 | g/10min | ASTM D1238 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 105 | ℃ | |
| Vicat Softening Temp | |||
| 84 | ℃ | ASTM D1525 | |
| Embrittlement temperature | -40 | ℃ | ASTM D746 |
| Linear coefficient of thermal expansion |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 49 | ASTM D2240 | |
| tensile strength | |||
| 23℃ | 12 | MPa | ASTM D638 |
| Tensile strain | |||
| Fracture, 23 ℃ | 500 | % | ASTM D638 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |