| About |
|---|
| Stock shapes extruded from Radel® R resins offer a superior combination of high performance properties that include excellent thermal stability, outstanding toughness, and good environmental stress cracking resistance. These properties make Radel ® R stock shapes attractive for a variety of demanding applications. The standard color of Radel ® R is off white, but a transparent grade is available. Applications Include: Dairy connectors Automotive fuses Food service trays Aircraft interior parts Sockets and connectors Advantages of Radel® R: Outstanding impact resistance Resistance to hydrolysis Transparent grade available Excellent thermal stability Combustion resistance without additives&& |
| Product Description | |
|---|---|
| Supplier | Westlake Plastics |
| Generic | PES |
| Material Status | Commercial: Active |
| Features | High impact resistance,Hydrolysis stability,Ultra high toughness,Heat Stabilized,High ESCR,V-0 |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.29 | g/cm³ | ASTM D792 |
| Water absorption rate | |||
| 24hr | 0.37 | % | ASTM D570 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 690 | J/m | ASTM D256 |
| Notched impact strength of cantilever beam | 无断裂 | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | ASTM D648 | ||
| 0.45 MPa, unannealed | 214 | ℃ | ASTM D648 |
| 1.8 MPa, unannealed | 207 | ℃ | ASTM D648 |
| Linear coefficient of thermal expansion | |||
| MD | 5.6E-5 | 1/℃ | ASTM D696 |
| Thermal conductivity coefficient | 0.35 | W/m/K | ASTM C177 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | > 1.0E+15 | ohms·cm | ASTM D257 |
| Dielectric strength | 14 | kV/mm | ASTM D149 |
| Dielectric constant | |||
| 1 kHz | 3.45 | ASTM D150 | |
| Dissipation factor | |||
| 1 kHz | 9.0E-4 | ASTM D150 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| 0.79 mm | V-0 | UL 94 | |
| Extreme oxygen index | 38 | % | ASTM D2863 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Transmittance | 50.0 | % | ASTM D1746 |
| Haze | 15 | % | ASTM D1746 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-level | 122 | ASTM D785 | |
| Tensile modulus | 2340 | MPa | ASTM D638 |
| tensile strength | |||
| yield | 69.6 | MPa | ASTM D638 |
| Tensile strain | ASTM D638 | ||
| yield | 7.2 | % | ASTM D638 |
| fracture | 60 to 120 | % | ASTM D638 |
| Bending modulus | 2410 | MPa | ASTM D790 |
| bending strength | |||
| yield | 91.0 | MPa | ASTM D790 |
| Compression modulus | 1730 | MPa | ASTM D695 |
| compressive strength | 98.9 | MPa | ASTM D695 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |