| About |
|---|
| COSMOPLENE® FC9413G is a Polypropylene Random Copolymer (PP Random Copolymer) product. It can be processed by extrusion coating and is available in Asia Pacific. Applications of COSMOPLENE® FC9413G include coating applications, film and packaging. Characteristics include: Clarity Copolymer Good Sealability High Stiffness&& |
| Product Description | |
|---|---|
| Supplier | TPC |
| Generic | PP copolymer |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Machinable,Random copolymer,Terpolymer,Low temperature heat sealing |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.900 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 20 | g/10min | ASTM D1238 | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| 23℃ | 29.4 | MPa | ASTM D638 |
| Bending modulus | |||
| Tensile strain | |||
| Fracture, 23 ℃ | 800 | % | ASTM D638 |
| Apparent | 780 | MPa | ASTM D747 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 146 | ℃ | |
| Vicat Softening Temp |
| Process Conditions | |||
|---|---|---|---|
| Extrusion molding conditions | Nominal value | Unit | Test method |
| Zone 1 temperature | 280-320 | °C | |
| Zone 3 temperature | 280-320 | °C | |
| Zone 5 temperature | 280-320 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |