Hanwha Total PP RJ781Z

About
Description RJ781Z is a high flow propylene-ethylene random polypropylene for manufacturing transparent injection molded articles. It is produced using Hanwha Total’s proprietary non-phthalate catalyst developed via innovative catalyst technology complying with EU REACH regulation (Annex XIV). In addition, RJ781Z has excellent transparency being suitable for high quality products. Characteristics Excellent transparency, BPA (bisphenol-A) Free Wide Processing window can increase productivity, decrease cycle time, & save cost by low temperature injection Applications high quality products such as food containers, storage box, housewares&&

About

Description RJ781Z is a high flow propylene-ethylene random polypropylene for manufacturing transparent injection molded articles. It is produced using Hanwha Total’s proprietary non-phthalate catalyst developed via innovative catalyst technology complying with EU REACH regulation (Annex XIV). In addition, RJ781Z has excellent transparency being suitable for high quality products. Characteristics Excellent transparency, BPA (bisphenol-A) Free Wide Processing window can increase productivity, decrease cycle time, & save cost by low temperature injection Applications high quality products such as food containers, storage box, housewares&&

Product Description
Supplier	HANWHA
Generic	PP copolymer
Material Status	Commercial: Negative
Features	Excellent Processability,Good Clarity,High liquidity,Food contact compliance,No BPA,Random copolymer
Availabilitys	North America,Asia Pacific
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.910	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	25	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	49	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	100	℃	ASTM D648

optical performance	Nominal value	Unit	Test method
Haze
2000 µm	12	%	ASTM D1003

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	85		ASTM D785
tensile strength
yield	32.4	MPa	ASTM D638
Tensile strain
fracture	500	%	ASTM D638
Bending modulus	1180	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.