Fluoroloy® A01

About
Features/Benefits: Color: White FDA compliant Low gas permeability Good cryogenic properties Limited wear and heat resistance Working Temperature Range: -268° to +260°C [-450° to +500°F]&&

Product Description
SupplierSaint Gobain
Generic热塑性聚酯
Material StatusCommercial: Active
FeaturesLow odor
AvailabilitysAfrica & Middle East ,North America,Asia Pacific,Europe

Technical Data
PHYSICALNominal valueUnitTest method
Density2.15g/cm³ASTM D792

THERMALNominal valueUnitTest method
Linear coefficient of thermal expansion ASTM D696
MD:26~200℃1.3E-41/℃ASTM D696
TD:26~200℃1.5E-41/℃ASTM D696

MECHANICALNominal valueUnitTest method
Shore hardness
Shaw’s D50 to 65 ASTM D2240
Tensile modulus386MPaASTM D638
tensile strength27.5MPaASTM D1708
Tensile strain
fracture300%ASTM D1708
Compression modulus558MPaASTM D695
compressive strength
1% strain8.27MPaASTM D695
friction coefficient0.050 to 0.080 ASTM D3702
Load deformation
14 MPa10.0%ASTM D621

Notes
1. Typical properties: these are not to be construed as specifications.
2. 24 hours
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.