| About |
|---|
| INSULCAST 333 is a moderate viscosity, self-extinguishing, epoxy potting/casting compound which conforms to the component program of Underwriters Laboratories’ Flame Class 94V-O.&& |
| Product Description | |
|---|---|
| Generic | PUR-酯/醚+TDI |
| Material Status | Commercial: Active |
| Features | Self-extinguishing |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.16 | g/cm³ | ASTM D1505 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 85 | ASTM D2240 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | ASTM D412 | ||
| yield | 46.4 | MPa | ASTM D412 |
| 100% strain | 5.38 | MPa | ASTM D412 |
| 300% strain | 9.10 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 650 | % | ASTM D412 |
| Compression deformation | 30 | % | ASTM D395B |
| Basho’s elasticity | 35 | % | ASTM D2632 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| storage stability | 3.0 to 6.0 | min | |
| stripping time | |||
| 100℃ | 20 | min | |
| Post curing time | |||
| 100℃ | 4.0 | hr |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |