| About |
|---|
| BorECO BA2000 is a high molecular weight, low melt flow rate polypropylene block copolymer with a good balance of mechanical properties. This grade offers superior stiffness while keeping good impact resistance and shows excellent processability.&& |
| Product Description | |
|---|---|
| Supplier | Borealis AG |
| Generic | PP copolymer |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Excellent Processability,Low liquidity,High impact resistance,Renewable resources,Block Copolymer,High molecular weight |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.900 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 0.30 | g/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 38.0 | MPa | ISO 527-2/50 |
| Tensile strain | |||
| yield | 6.5 | % | ISO 527-2/50 |
| Bending modulus | 2000 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -20℃ | 2.0 | kJ/m² | ISO 179/1eA |
| 23℃ | 29 | kJ/m² | ISO 179/1eA |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Barrel 1 zone temperature | 200 to 220 | °C | |
| Barrel 2 zone temperature | 200 to 220 | °C | |
| Barrel 3 zone temperature | 200 to 220 | °C | |
| Barrel 4 zone temperature | 200 to 220 | °C | |
| Barrel 5 zone temperature | 200 to 220 | °C | |
| Melt temperature | 210 to 230 | °C | |
| Nozzle temperature | 210 to 220 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 0.079 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |