| About |
|---|
| The E Series contains none of the PFOA compound (ammonium salt) used as a conventional PTFE polymerizable emulsifier. The CD Grade products are new, environmentally compatible PTFE fine powders offering all the characteristics of the conventional PTFE, without containing PFOA. The CD grade products can be used in seal tapes, stretch films, tubes, small diameter rods, electrical wire coatings, etc., by paste extrusion with an aid. The CD grade products are easily fibrillated by the application of shearing force. They can therefore be used as flame retardant additives to improve the melt tension of thermoplastic resin. Only very small amounts confer the flame retardant effects. Applications: Fine tubes Electrical wire coatings Characteristics: High RR Excellent transparency&& |
| Product Description | |
|---|---|
| Supplier | Asahi Glass |
| Generic | PTFE |
| Material Status | Commercial: Active |
| Features | Good Clarity,Flame Characteristics,Copolymer |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| Supplementary information | Nominal value | Unit | Test method |
| Extrusion pressure | 0.900 | Internal Method | |
| Average particle size | 550.0 | µm | |
| Reduction Ratio | 250 to 4000 | ||
| Supplementary information | Nominal value | Unit | Test method |
|---|
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | 2.18 | g/cm³ | |
| Apparent density | 0.50 | g/cm³ |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 20° die angle, 16% ISOPAR H, and RR=1000 |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |