Braskem PE SHD7255LS-L

About
Braskem PE SHD7255LS-L SHD7255LS-L is a high-density polyethylene, developed for the injection molding with good tenacity and impact properties combined with a good stiffness. It presents a radio between melt flow and density that provides excellent mechanical properties. This resin has additives against the action of ultraviolet radiation. The minimum biobased content of this grade is 94%, determined according to ASTM D6866. Application: Boxes for frozen food and horticultural products; Industrial containers and boxes for general use. Process: Injection Molding.&&Braskem PE SHD7255LS-L SHD7255LS-L is a high-density polyethylene, developed for the injection molding with good tenacity and impact properties combined with a good stiffness. It presents a radio between melt flow and density that provides excellent mechanical properties. This resin has additives against the action of ultraviolet radiation. The minimum biobased content of this grade is 94%, determined according to ASTM D6866. Application: Boxes for frozen food and horticultural products; Industrial containers and boxes for general use. Process: Injection Molding.&&Braskem PE SHD7255LS-L SHD7255LS-L is a high-density polyethylene, developed for the injection molding with good tenacity and impact properties combined with a good stiffness. It presents a radio between melt flow and density that provides excellent mechanical properties. This resin has additives against the action of ultraviolet radiation. The minimum biobased content of this grade is 94%, determined according to ASTM D6866. Application: Boxes for frozen food and horticultural products; Industrial containers and boxes for general use. Process: Injection Molding.&&

About

Braskem PE SHD7255LS-L SHD7255LS-L is a high-density polyethylene, developed for the injection molding with good tenacity and impact properties combined with a good stiffness. It presents a radio between melt flow and density that provides excellent mechanical properties. This resin has additives against the action of ultraviolet radiation. The minimum biobased content of this grade is 94%, determined according to ASTM D6866. Application: Boxes for frozen food and horticultural products; Industrial containers and boxes for general use. Process: Injection Molding.&&Braskem PE SHD7255LS-L SHD7255LS-L is a high-density polyethylene, developed for the injection molding with good tenacity and impact properties combined with a good stiffness. It presents a radio between melt flow and density that provides excellent mechanical properties. This resin has additives against the action of ultraviolet radiation. The minimum biobased content of this grade is 94%, determined according to ASTM D6866. Application: Boxes for frozen food and horticultural products; Industrial containers and boxes for general use. Process: Injection Molding.&&Braskem PE SHD7255LS-L SHD7255LS-L is a high-density polyethylene, developed for the injection molding with good tenacity and impact properties combined with a good stiffness. It presents a radio between melt flow and density that provides excellent mechanical properties. This resin has additives against the action of ultraviolet radiation. The minimum biobased content of this grade is 94%, determined according to ASTM D6866. Application: Boxes for frozen food and horticultural products; Industrial containers and boxes for general use. Process: Injection Molding.&&

Product Description
Supplier	Braskem
Generic	HDPE
Material Status	Commercial: Active
Features	Good Rigidity,Weather resistance is good,High impact resistance,Renewable resources,Food contact compliance,No BPA,High density
Availabilitys	North America,Latin America,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.954	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	4.5	g/10min	ASTM D1238
ESCR(Environmental Stress Cracking Resistance)
50 ℃, 2.00 mm, 100% non-ionic surfactant, molded, F50	< 5.00	hr	ASTM D1693
Biobased Content	94	%	ASTM D6866

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D, molded	63		ASTM D2240
tensile strength
Yield, molding	27.0	MPa	ASTM D638
Bending modulus
1% cut, molded	1270	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
Compression Molding	45	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed, molded	74.0	℃	ASTM D648
Vicat Softening Temp	127	℃	ASTM D1525 2

Notes
1. Typical properties: these are not to be construed as specifications.
2. Loading 1 (10 N)
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.