| About |
|---|
| F622F is a medium-low molecular weight PVC homopolymer designed primarily for rigid extrusion applications, but it is also suitable for many flexible applications. This product has high bulk density and excellent dry flow characteristics, making it desirable for dry blending applications where uniform feed rate to an extruder is important.&& |
| Product Description | |
|---|---|
| Supplier | fpc-tw |
| Generic | PVC, not specified |
| Material Status | Commercial: Active |
| Features | Good flexibility,Homopolymer |
| Availabilitys | North America,Europe |
| Process Methods | Film extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Apparent density | 0.52 | g/cm³ | ASTM D1895 |
| K-Value | 67.0 | ||
| pollutant | 20 | ||
| Particle size distribution | ASTM D1921 | ||
| 200 Mesh | 5.0 | % | ASTM D1921 |
| 40 Mesh | 100 | % | ASTM D1921 |
| Intrinsic viscosity | 0.93 | ASTM D1243 | |
| Gel content | 20.0 | Internal Method | |
| Relative viscosity | 2.20 | ASTM D1243 | |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Residual Vinyl Chloride Monomer | < 1 | ppm | Internal Method |
| volatility | 0.20 | % | ASTM D3030 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. OCS per 100g |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |