| About |
|---|
| Daikin PTFE D-610C is a homopolymer polytetrafluoroethylene aqueous dispersion manufactured without the use of PFOA. D-610C has been designed for cast film and glass fabric coating applications where increased build is desired. D-610C contains a more environmentally friendly surfactant that leaves fewer residues in the finished product than traditional surfactants.&& |
| Product Description | |
|---|---|
| Supplier | Daikin Fluorochemicals |
| Generic | PTFE |
| Material Status | Commercial: Active |
| Features | Homopolymer |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.50 to 1.53 | g/cm³ | Internal Method |
| PH value | |||
| 25℃ | 9.5 to 10.5 | Internal Method | |
| Solid content | 59 to 61 | % | Internal Method |
| viscosity | |||
| 25℃ | < 0.035 | Pa·s | Internal Method |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Surfactant content | |||
| on PTFE | 5.5 to 6.5 | % | Internal Method |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Hydrometer, 25°C |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |